Accessories

Display All Lists | Hide All Lists

• 06AR6-X
  Multimode, 6 Fiber Optic Cable, 62.5/125, 1310nm Armored, ST-ST Connectors
• 2ZR6AA-X
  Multimode Duplex Fiber Optic Cable, 62.5/125, 1310nm, ST-ST Connectors
• 2ZR6AB-X
  Multimode Duplex Fiber Optic Cable, 62.5/125, 1310nm, ST-SC Connectors
• 2ZR6AC-X
  Multimode Duplex Fiber Optic Cable, 62.5/125, 850nm ST-LC
• 2ZR6BB-X
  Multimode Duplex Fiber Optic Cable, 62.5/125, 1310nm, SC-SC Connectors
• 2ZR6CC-X
  Multimode Duplex Fiber Optic Cable, 62.5/125, 850nm LC-LC
• 2ZR8AA-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125um, 1310nm, ST-ST Connectors
• 2ZR8AB-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125, 1310nm, ST-SC Connectors
• 2ZR8AC-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125, 1310nm ST-LC
• 2ZR8BB-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125, 1310nm, SC-SC Connectors
• 2ZR8BC-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125, 1310nm SC-LC
• 2ZR8CC-X
  Singlemode Duplex Fiber Optic Cable, 8.3/125, 1310nm LC-LC
• ANT-CAB-195-RPSMA-RPSMA-X
  702-W Antenna bulkhead extension cable set for use with N-TRON's 702-W wireless radio antennas. Each set includes three cables with the following connectors; Straight RP-SMA bulkhead jack on one end and 90˚ RP-SMA plug on the other end.
• ANT-CAB-400-N-RPSMA-X
  Low loss CA-400 coaxial cable with (1) RP-SMA connector and (1) N Male connector for use with the 702-W
• ANT-CAB-400-N-RPTNC-X
  Low loss CA-400 coaxial cable with (1) RP-TNC connector and (1) N Male connector for use with the 702M12-W
• CAT5E-M12-M12-X
  Cat5e shielded twisted pair with straight M12 to Straight M12 connector, Shielded
• CAT5E-M12-RJ45-X
  Cat5e shielded twisted pair with Straight M12 to RJ45 connector, Shielded
• CAT5E-M12-X
  Cat5e shielded twisted pair with straight M12 to bare end, Shielded
• CAT5E-RM12-M12-X
  Cat5e shielded twisted pair with 90° M12 to Straight M12, Shielded
• CAT5E-RM12-RJ45-X
  Cat5e shielded twisted pair with 90° M12 to RJ45 connector, Shielded
• CAT5E-RM12-RM12-X
  Cat5e shielded twisted pair with 90° M12 to 90° M12, Shielded
• CAT5E-RM12-X
  Cat5e shielded twisted pair with 90° M12 to bare end, Shielded
• CAT5E-X
  Cat5E Shielded Twisted Pair (STP), shielded cable, RJ45 Connectors, (shield connected on Switch end only) with strain relief boots
• PWR-M12-A-X
  Power Cable, Straight M12 A-coded Female Connector to Bare End, Shielded
• PWR-RM12-A-X
  Power Cable, 90° M12 A-coded Female Connector to Bare End, Shielded
• SERIAL-DB9-M12
  Serial cable with DB-9 to Straight M12 connectors, 5ft. In length, Shielded
• SERIAL-DB9-RM12
  Serial cable with DB-9 to 90º M12 connectors, 5ft. In length, Shielded
• Note: All Custom Length Cables are Non-Cancellable and Non-Returnable

• 100-MDR-1
  Metal DIN-Rail option for 100 Series switches in short enclosures. Factory installed option. Must be specified with switch order.
• 100-MDR-2
  Metal DIN-Rail option for 100 Series switches in tall enclosures. Factory installed option. Must be specified with switch order.
• 1000-PM
  1000 Series Panel Mount Kit
• 300-PM
  300 Series Panel Mount Kit
• 500-UTA89
  Optional Metal DIN Rail Clip for 508TX & 509FX (Standard on 516TX & 517FX)
• 700-PM
  Panel Mount Kit for use with N-TRON's 700 and 7000 Series Switches excluding 702-W, 702M12-W, and 708M12 Models
• 7000-UTA89
  Optional Metal DIN Rail Clip for 7000 Series to allow for Horizontal Mounting in Smaller Spaces
• 702-W-PM
  Panel Mount Kit for use with N-TRON's 702-W Wireless Radio
• 702M12-PK
  Pole Mount Kit for use with N-TRON's 702M12-W Wireless Radio
• 900-PM
  Universal Panel Mount Kit
• 900-RM
  19” Rack mount kit for N-TRON Switches
• 9000-PM
  9000 Series Panel Mount Kit
• 9000-UTA107
  9000 Series Optional Metal DIN-Rail Clip (One is included on 9000BP chassis, up to 3 may be installed for more secure mounting)
• CPMA-1
  Metal Panel Mount option for the 709FX, 710FX2, 711FX3, and 7010TX products. Factory installed option; must be specified with switch order.
• CPMA-2
  Metal Panel Mount option for the 712FX4 and 714FX6 products. Factory installed option; must be specified with switch order.
• M12DRC-ISO
  DIN-Rail Kit for N-TRON's M12 Products, Two Isolated Plastic DIN-Rail Clips and Mounting Screws Included
• M12DRC-MTL
  DIN-Rail Kit for N-TRON's M12 Products, Two Metal DIN-Rail Clips and Mounting Screws Included
• URMK (formerly p/n 900-RM)
  19” Universal Rack mount kit for use with N-TRON Switches

• NTPS-24-1.3
  DIN-Rail Power Supply, 1.3 Amp @ 24 VDC
• NTPS-24-3
  DIN-Rail Power Supply, 3.0 Amp @ 24 VDC
• NTPS-24-5
  DIN-Rail Power Supply, 5.0 Amp @ 24 VDC
• NTPS-24-TT-500
  Table Top Power Supply for N-TRON 500 Series, 1.04 Amp @ 24 VDC, Pre-Terminated, ~12ft. 0° to 50°c, UL, Canadian, and CE approvals. This Power Supply is not appropriate for use with 524TX, or 526FX2 models.
• NTPS-24-TT-600
  Table Top Power Supply for N-TRON 600 Series, 1.04 Amp @ 24 VDC, Pre-Terminated, ~12ft. 0° to 50°c, UL, Canadian, and CE approvals
• NTPS-24-TT-700
  Table Top Power Supply for N-TRON 700 Series, 1.04 Amp @ 24 VDC, Pre-Terminated, ~12ft. 0° to 50°c, UL, Canadian, and CE approvals Note: This Power Supply is not appropriate for use with M12, PoE, or HV models.
• NTPS-24-TT-XXX
  Table Top Power Supply, 0.6 Amp @ 24 VDC, Pre-Terminated, ~12ft. (XXX = 100, 200, 300, or 400 Series) 0° to 50°c, UL, Canadian, and CE approvals Note: This Power Supply is not appropriate for use with M12, PoE, or HV models.
• NTPS-24-WA-700
  Wall Adaptor Power Supply for N-TRON 700 Series, 0.8 Amp @ 24 VDC, Pre-Terminated, ~6ft. 0°c to 40°c, UL, Canadian, and CE approvals Note: This Power Supply is not appropriate for use with M12, PoE, or HV models
• NTPS-24-WA-XXX
  Wall Adaptor Power Supply, 0.6 Amp @ 24 VDC, Pre-Terminated, ~6ft. (XXX = 100, 200, 300, 400, 500, or 600 Series) 0°c to 40°c, UL, Canadian, and CE approvals Note: This Power Supply is not appropriate for use with M12, PoE, HV, 524TX, and 526FX2 models.
• NTPS-48-2
  DIN-Rail Power Supply, 2.0 Amp @ 48 VDC PoE PSU, and -HV Models
• NTPS-48-5
  DIN-Rail Power Supply, 5.0 Amp @ 48 VDC PoE PSU, and -HV Models

• NTSFP-LX-10
  1000BaseLX Singlemode Fiber SFP Pluggable Mini-GBIC Transceiver (LC Style Connector, 10km)
• NTSFP-LX-40
  1000BaseLX Singlemode Fiber SFP Pluggable Mini-GBIC Transceiver (LC Style Connector, 40km)
• NTSFP-LX-80
  1000BaseLX Singlemode Fiber SFP Pluggable Mini-GBIC Transceiver (LC Style Connector, 80km)
• NTSFP-SX
  1000BaseSX Multimode Fiber SFP Pluggable Mini-GBIC Transceiver (LC Style Connector, 550m)
• NTSFP-TX
  1000BaseT Copper SFP Pluggable Mini-GBIC Transceiver (RJ-45 Connectors)

• iSNMP-BAS
  SNMP OPC Server Node License CD (BASIC)
• iSNMP-BAS-ES
  SNMP OPC Extended Support for iSNMP-BAS
• iSNMP-ENT
  SNMP OPC Server Node License CD (ENTERPRISE)
• iSNMP-ENT-ES
  SNMP OPC Extended Support for iSNMP-ENT
• iSNMP-EXP
  SNMP OPC Server Node License CD (EXPERT)
• iSNMP-EXP-ES
  SNMP OPC Extended Support for iSNMP-EXP
• N-VIEW-OPC
  N-View OLE for Process Control Server Site License, CD with N-View OPC, N-View Configuration Utility, and Manual

• ANT-MD24-12
  2.4GHz, 12dBi Mini-Directional Antenna, N-Female Connector and Pole Mount Bracket Included
• ANT-PAD24-16
  2.4 GHz, 16dBi Panel Directional Antenna, N-Female Connector and Pole Mount Bracket Included
• ANT-PAD58-19
  5.8 GHz, 19dBi Panel Directional Antenna, N-Female Connector and Pole Mount Bracket Included
• ANT-PD58-32
  5.8 GHz, 32dBi Parabolic Dish Antenna N-Female Connector and Pole Mount Bracket Included

• NTCD-128
  SD Card, Configuration Device
• NTSA-CAT5e
  In-line DIN-Rail Cat5e Surge Arrester

Click here to view our price list >>

For additional information, please contact us.